PR10 – PR16 – PR20 – PR25

PR10 - PR16 - PR20 - PR25

Homepage > Standard Range > PR10 - PR16 - PR20 - PR25

Pompe Pollard PR10

  • The PR10 to PR25 reversible pumps are designed to pump lubricating fluids (oil, diesel oil, etc.)
  • Their flow rate is from 1 to 37 L / min; maximum working pressure 10 bar
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • The “PR” type pumps are equipped with the “Reverse Plus system” which allows rotation in both directions while maintaining the same flow direction of the fluid.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
Flow range (L/min) ≤ 37
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 65
Seal type Mechanical seal
Weight 6,2 kg

Ref.  
PR10 15 L/min
PR16 24  L/min
PR20 30  L/min
PR25 37  L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200