Tag Archives: 10 to 25 cm³/rotation

Pompe Pollard MPLN10

MPLN10 – MPLN16 – MPLN20 – MPLN25

MPLN10 - MPLN16 - MPLN20 - MPLN25

Homepage > Standard Range > MPLN10 - MPLN16 - MPLN20 - MPLN25

Pompe Pollard MPLN10

  • The motor-pumps of the range MPLN10 to MPLN25 are suitable for pumping fluids having a lubricating propriety (oil, diesel oil, etc.).
  • Their flow rates range is from 7 to 37 L / min, for a working pressure up to 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
Flow range (L/min) ≤ 37
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 65
Seal type Mechanical seal
Weight Depending on the motorization
In this range of capacities the standard Pollard motorpumps are equipped with 0,75kW, 4 poles (1500 rpm), B34, flange FT100 motors.

 

Ref.  
MPLN10 15 L/min
MPLN16 24  L/min
MPLN20 30  L/min
MPLN25 37  L/min
Viscosity (cSt) Max. speed (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

Pompe Pollard MP25

MP10 – MP16 – MP20 – MP25

MP10 - MP16 - MP20 - MP25

Homepage > Standard Range > MP10 - MP16 - MP20 - MP25

Pompe Pollard MP25

  • The motor-pumps of the range MP10 to MP25 are suitable for pumping fluids having a lubricating propriety (oil, diesel oil, etc.).
  • Their flow rates range is from 7 to 37 L / min, for a working pressure up to 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
Flow range (L/min) ≤ 37
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 65
Seal type Mechanical seal
Weight Depending on the motorization

Also available with reverse system.

In this range of capacities the standard Pollard motorpumps are equipped with 0,75kW, 4 poles (1500 rpm), B34, flange FT100 motors.

Ref.  
MP10 15 L/min
 MP16 24  L/min
MP20 30  L/min
MP25 37  L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

Pompe Pollard PR10

PR10 – PR16 – PR20 – PR25

PR10 - PR16 - PR20 - PR25

Homepage > Standard Range > PR10 - PR16 - PR20 - PR25

Pompe Pollard PR10

  • The PR10 to PR25 reversible pumps are designed to pump lubricating fluids (oil, diesel oil, etc.)
  • Their flow rate is from 1 to 37 L / min; maximum working pressure 10 bar
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • The “PR” type pumps are equipped with the “Reverse Plus system” which allows rotation in both directions while maintaining the same flow direction of the fluid.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
Flow range (L/min) ≤ 37
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 65
Seal type Mechanical seal
Weight 6,2 kg

Ref.  
PR10 15 L/min
PR16 24  L/min
PR20 30  L/min
PR25 37  L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

Pompe Pollard PLN10

PLN10 – PLN16 – PLN20 – PLN25

PLN10 - PLN16 - PLN20 - PLN25

Homepage > Standard Range > PLN10 - PLN16 - PLN20 - PLN25

Pompe Pollard PLN10

  • The PLN10 to PLN25 pumps are designed to pump lubricating fluids (oil, diesel oil, etc.).
  • Their flow rate is from 1 to 37 L / min; maximum working pressure 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
"LN" Version  
Flow range (L/min) ≤ 37
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 65
Seal type Mechanical seal
Weight 6.2 kg

Ref.  
P10 15 L/min
P16 24  L/min
P20 30  L/min
P25 37  L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200