Tag Archives: 30 to 67 cm³/rotation

pompe Pollard MPLN30

MPLN30 – MPLN40 – MPLN60 – MPLN67

MPLN30 - MPLN40 - MPLN60 - MPLN67

Homepage > Standard Range > MPLN30 - MPLN40 - MPLN60 - MPLN67

pompe Pollard MPLN30

  • The motor-pumps of the range MPLN30 to MPLN67 are suitable for pumping fluids having a lubricating propriety (oil, diesel oil, etc.).
  • Their flow rates range is from 20 to 90 L / min, for a working pressure up to 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 

"LN" Version

Flow range (L/min) ≤ 90
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 70
Seal type Mechanical seal
Weight Depending on the motorization

Ref.  
MPLN30 45 L/min
MPLN40 60  L/min
MPLN60 90 L/min
MPLN67 100 L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

Pompe Pollard MP30

MP30 – MP40 – MP60 – MP67

MP30 - MP40 - MP60 - MP67

Homepage > Standard Range > MP30 - MP40 - MP60 - MP67

Pompe Pollard MP30

  • The motor-pumps of the range MP30 to MP67 are suitable for pumping fluids having a lubricating propriety (oil, diesel oil, etc.).
  • Their flow rates range is from 20 to 90 L / min, for a working pressure up to 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
Flow range (L/min) ≤ 90
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 70
Seal type Mechanical seal
Weight Depending on the motorization
Also available with reverse system

Ref.  
MP30 45 L/min
MP40 60  L/min
MP60 90 L/min
MP67 100 L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

Pompe Pollard PR30

PR30 – PR40 – PR60 – PR67

PR30 - PR40 - PR60 - PR67

Homepage > Standard Range > PR30 - PR40 - PR60 - PR67

Pompe Pollard PR30

  • The PR30 to PR67 reversible pumps are designed to pump lubricating fluids (oil, diesel oil, etc.)
  • Their flow rate is from 1 to 90 L / min; maximum working pressure 10 bar
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • The “PR” type pumps are equipped with the “Reverse Plus system” which allows rotation in both directions while maintaining the same flow direction of the fluid.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 
Flow range (L/min) ≤ 90
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 70
Seal type Mechanical seal
Weight 9 kg

Ref.  
PR30 45 L/min
PR40 60  L/min
PR60 90 L/min
PR67 100 L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

Pompe Pollard PLN30

PLN30 – PLN40 – PLN60 – PLN67

PLN30 - PLN40 - PLN60 - PLN67

Homepage > Standard Range > PLN30 - PLN40 - PLN60 - PLN67

Pompe Pollard PLN30

  • The PLN30 to PLN67 pumps are designed to pump lubricating fluids (oil, diesel oil, etc.).
  • Their flow rate is from 1 to 90 L / min; maximum working pressure 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
 

"LN" Version

Flow range (L/min) ≤ 90
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 70
Seal type Mechanical seal
Weight 9 kg

Ref.  
PLN30 45 L/min
PLN40 60 L/min
PLN60 90 L/min
PLN67 100 L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200