- The motor-pumps of the range MP01 to MP08 are suitable for pumping fluids having a lubricating propriety (oil, diesel oil, etc.).
- Their flow rates range is from 1 to 24 L / min, for a working pressure up to 10 bar.
- The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
- These robust industrial pumps are designed to provide continuous service for many years.
- For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
___
Exists in versions :
- Non reversible (MPX01 - MPX02 - MPX04 - MPX06 - MPX08)
- Reverse Plus (MP01 - MP02 - MP04 - MP06 - MP08)
| Flow range (L/min) | ≤ 24 |
| Speed rotation range (rpm) | ≤ 3000* |
| Fluid viscosity range (cSt) | 1 – 10000* |
| Suction capacity (Bar) | -0,5 |
| Max. operating pressure (Bar) | 10 |
| Integrated by-pass | Yes |
| By-pass standard setting (Bar) | 5 |
| Standard operating temperature (°C) | -20 / +150 |
| Body and stator material | Cast iron |
| Shaft and vanes material | Hardened steel |
| Max. size of hard particles (microns) | 200 |
| Acoustic pressure (dB) | 60 |
| Seal type | Mechanical seal |
| Weight | Depending on the motorization |
| In this range of capacities the standard Pollard motorpumps are equipped with 0,37kW, 4 poles (1500 rpm), B34, flange FT85 motors. | |
| Ref. | |
| MP01 | 1,5 L/min |
| MP02 | 3 L/min |
| MP04 | 6 L/min |
| MP06 | 9 L/min |
| MP08 | 11 L/min |
| Viscosity (cSt) | Speed max. (rpm) |
| Visc. < 500 | 3000 |
| 500 < Visc. < 1000 | 1500 |
| 1000 < Visc. < 3000 | 1000 |
| 3000 < Visc. < 5000 | 750 |
| 5000 < Visc. < 10000 | 500 |
| Visc. > 10000 | 200 |
p-pr-mp_01-08cm³_3.pdf