MP30 – MP40 – MP60 – MP67

MP30 - MP40 - MP60 - MP67

Pompe Pollard MP30

  • The motor-pumps of the range MP30 to MP67 are suitable for pumping fluids having a lubricating propriety (oil, diesel oil, etc.).
  • Their flow rates range is from 20 to 90 L / min, for a working pressure up to 10 bar.
  • The Pollard “CMtec” technology guarantees good volumetric efficiency, good suction capacity and the ability to pump viscous fluids.
  • These robust industrial pumps are designed to provide continuous service for many years.
  • For any request, not included in the catalog, a feasibility analysis can be carried out by our design office on simple demand.
  • Pollard can also offer units with heat engine, consult us.
 
Technical data
Technical drawing
Flow at 1500 rpm
Viscosity/speed
3D File
Data Sheet
Flow range (L/min) ≤ 90
Speed rotation range (rpm) ≤ 1500*
Fluid viscosity range (cSt) 1 – 10000*
Suction capacity (bar) -0,5
Max. operating pressure (bar) 10
Integrated by-pass Yes
By-pass standard setting (bar) 5
Standard operating temperature (°C) -20 / +150
Body and stator material Cast iron
Shaft and vanes material Hardened steel
Max. size of hard particles (microns) 200
Acoustic pressure (dB) 70
Seal type Mechanical seal
Weight Depending on the motorization
Also available with reverse system

Ref.  
MP30 45 L/min
MP40 60  L/min
MP60 90 L/min
MP67 100 L/min
Viscosity (cSt) Speed max. (rpm)
Visc. < 1000 1500
1000 < Visc. < 3000 1000
3000 < Visc. < 5000 750
5000 < Visc. < 10000 500
Visc. > 10000 200

p-pr-mp_30-67cm³_2.pdf